Switching cam encoder NOCA
This involves a play-free electronic switching cam encoder (abbreviated to: NOCA) with a maximum of four galvanically separated switching outputs (cams), which can be set by the customer and which are activated or deactivated depending on the relevant position of the drive shaft. A parameterisable multiturn absolute encoder with analogue interface plus the switching cam encoder printed circuit board with separate controller are integrated into the compact housing. The analogue signal and switching outputs can be parameterised separately using multifunction pins (MFP and PRE) in the connector.
Product category: | Switching cam encoders |
Interface: | Analogue, Relais |
Single- or Multiturn: | Multiturn |
Design: | 64mm, 120mm |
Flange and shaft: | Clamped flange (NOCA 64), Mounting flange (NOCA 120) |
Number of switching outputs: | 2 switching outputs, max. 4 (with model NOCA79 up to 6) |
Housing material: | Aluminium, Stainless steel 1.4305, Stainless steel 1.4404 |
Measuring range: | 5760° = 16 revolutions (any values up to 1,474,560° = 4096 revolutions possible) |
Signal path: | CCW, CW |
Electrical connection: | Cable connection, Device connector M12 |
Output signal analogue: | 0 to 10VDC, 0 to 20 mA, 4 to 20 mA |
Electrial and/or mechanical variant: | Standard |
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
- Цена: Цену уточняйте
ООО «ФилФар Технолоджи»
220036, г. Минск, ул. Западная, д.13, к.519
Номер в Торговом реестре/Реестре бытовых услуг: 220993, Республика Беларусь
УНП: 192123248
Регистрационный орган: Минский горисполком
Дата регистрации компании: 18.09.2013
Ссылка на свидетельство/лицензию
Режим работы:
День | Время работы |
---|---|
Понедельник | 09:00-17:00 |
Вторник | 09:00-17:00 |
Среда | 09:00-17:00 |
Четверг | 09:00-17:00 |
Пятница | 09:00-17:00 |
Суббота | Выходной |
Воскресенье | Выходной |